They are units that enable and control announcements by selecting areas far away from the broadcast center such as information desk, secretariat, security etc. It can be mounted on the control desk, desktop and decoupled. 

1. The "ON/OFF" switch of the Announcement Control Module is switched on. It is observed that the led light is on.

2. Volume is adjusted from the "VOLUME" pot of the microphone.

3. "BASS" volume is adjusted according to the person who will make the announcement.

4. "TREBLE" volume is adjusted according to the person who will make the announcement.

5. Volume is adjusted from the volume pot of the gong.

6. Buttons in order from 1 to 3 represent 3 different zones. By pressing the touch button of the zone we want to make the announcement, announcements can be made to that zone or zones. It is observed that the led lights of the selected zones turn on. If you want to make announcements to all zones, it is enough to press the "ALL" button.

7. In order to make the announcement, the microphone is activated by pressing and holding the "MIC" button. The music is automatically cut and a special gong with a special beat sounds before the announcement. After the gong ends, the announcement is made by continuing to press and hold the "MIC" button. After the announcement is over, the "MIC" button is released. It is observed that the music broadcast continues automatically. 

Announcement broadcast control to 3 separate zones 

- Microphone on/off switch and light

- Microphone level control  

- Announcement warning gong and test button 

- Bass & Treble adjustment   

- On-off switch and light 

- Introduction:   1 Mic. 1mV / 600ohm 

- Frequency Band : 60-18kHz.

- Tone Control :  Bass 10dB 100Hz

                              Treble 10dB 10kHz

- Supply Voltage (AC) : 200-240V / 50-60 Hz.

- Supply Voltage (DC) : 12V,24V

- Size : 90x180x340mm

- Weight : 3.5kg